NETGEAR DGND3800B User Manual page 111

N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
e. In the Hash Alg drop-down list, select SHA-1.
f. In the SA Life drop-down list, select Unspecified.
g. In the Key Group drop-down list, select Diffie-Hellman Group 2.
Configure the VPN client key exchange proposal.
6.
In this step, you provide the type of encryption (DES or 3DES) to be used for this
connection. This selection has to match your selection in the modem router configuration.
a. Expand the Key Exchange subheading by double-clicking its name or clicking the +
symbol. Then select Proposal 1 below Key Exchange.
b. In the SA Life drop-down list, select Unspecified.
c. In the Compression drop-down list, select None.
d. Select the Encapsulation Protocol (ESP) check box.
e. In the Encrypt Alg drop-down list, select the type of encryption that is configured for
the encryption protocol in the modem router, as listed in
example uses Triple DES.
f. In the Hash Alg drop-down list, select SHA-1.
g. In the Encapsulation drop-down list, select Tunnel.
h. Leave the Authentication Protocol (AH) check box cleared.
Save the VPN client settings.
7.
In the Security Policy Editor window, select File > Save.
After you have configured and saved the VPN client information, your computer
automatically opens the VPN connection when you attempt to access any IP addresses
in the range of the remote VPN router's LAN.
Check the VPN connection.
8.
To check the VPN connection, you can initiate a request from the remote computer to the
modem router's network by using the Connect option in the NETGEAR ProSafe menu
bar. The NETGEAR ProSafe client reports the results of the attempt to connect. Since the
Virtual Private Networking
111
on page 101. This
Table 3