Power Management Setup - JETWAY V880DASR2A User Manual

SPP/EPP/ECP/ECP+EPP
To operate the onboard parallel port as Standard Parallel Port only, choose "SPP." To
operate the onboard parallel port in the EPP modes simultaneously, choose "EPP." By
choosing "ECP", the onboard parallel port will operate in ECP mode only. Choosing
"ECP+EPP" will allow the onboard parallel port to support both the ECP and EPP modes
simultaneously. The ECP mode has to use the DMA channel, so choose the onboard
parallel port with the ECP feature. After selecting it, the following message will appear:
"ECP Mode Use DMA" at this time, the user can choose between DMA channels 3 to 1.
The onboard parallel port is EPP Spec. compliant, so after the user chooses the onboard
parallel port with the EPP function, the following message will be displayed on the
screen: "EPP Mode Select." At this time either EPP 1.7 spec. or EPP 1.9 spec. can be
chosen.

3-8 Power Management Setup

The Power Management Setup allows you to configure your system to most effectively save
energy saving while operating in a manner consistent with your own style of computer use.
CMOS Setup Utility – Copyright(C) 1984-2004 Award Software
ACPI Function
ACPI Support Type
Power Management Option
HDD Power Down
Suspend Mode
Video Off Option
Video off Method
MODEM Use IRQ
Power Button Function
State After Power Failure
> Wake Up Events
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power Management
(ACPI). The settings are Enabled and Disabled.
Video Off Option
This determines the manner in which the monitor is blanked. The choice are Suspend →
off, All Modes → Off, and Always On.
Power Management Setup
Enabled
S1(POS)
User Define
Disabled
Suspend -> off
V/H SYNC+Blank
3
Instant-Off
Auto
Press Enter
F6:Optimized Defaults
33
Item Help
Menu Level >
F7:Standard Defaults