Table of Contents
Advertisement
(3)
1394 Port Headers (9-pin): 1394A, 1394B
(4)
IDE Activity LED: HD LED
This connector connects to the hard disk activity indicator light on the case.
(5)
Reset switch lead: RESET
This 2-pin connector connects to the case-mounted reset switch for rebooting your computer
without having to turn off your power switch. This is a preferred method of rebooting in order
to prolong the lift of the system's power supply. See the figure below.
(6)
Speaker connector: SPEAK
This 4-pin connector connects to the case-mounted speaker. See the figure below.
(7)
Power LED: PWR LED
The Power LED is light on while the system power is on. Connect the Power LED from the
system case to this pin.
(8)
Power switch: PWR BTN
This 2-pin connector connects to the case-mounted power switch to power ON/OFF the system.
(9)
Wake On-LAN Headers (3-pin) : WOL
This connector connects to a LAN card with a WAKE ON-LAN output. This connector power
up the system when a wake up signal is received through the LAN card.
This feature requires that Wake On LAN or Ring In Wake up is enabled.
NOTE:
1394A
Pin 1
1394 Port Headers
SPEAK
Pin 1
SPKR
FP
NC
G ND
VCC5
Pin 1
System Case Connections
WOL
1
3
Wake-On-LAN Headers
16
1394B
Pin 1
Advertisement
Table of Contents
