Install Memory - JETWAY POLARIS400 User Manual

When you put the CPU into the ZIF socket. No force require to insert of the CPU, then press
the level to Locate position slightly without any extra force.

2-4 Install Memory

This motherboard provides three 184-pin DUAL INLINE MEMORY MODULES (DIMM)
sites for memory expansion available from minimum memory size of 64MB to maximum
memory size of 3.0GB DDR SDRAM.
Valid Memory Configurations
Bank
Bank 0, 1 (DDR1)
Bank 2, 3 (DDR2)
Bank 4, 5 (DDR3)
Total
NOTE! Make sure the total installed memory does not exceeds 3.0GB, otherwise the
system may hang during startup.
Generally, installing DDR SDRAM modules to your motherboard is very easy, you can refer
to figure 2-4 to see what a 184-Pin
NOTE! When you install DIMM module fully into the DIMM socket the eject tab
should be locked into the DIMM module very firmly and fit into its
indention on both sides.
Socket-A
AMD
CPU ZIF Socket-A
184-Pin DIMM
DDR 266/333/400 DDR SDRAM
DDR 266/333/400 DDR SDRAM
DDR 266/333/400 DDR SDRAM
System Memory (Max. 3.0GB)
DDR 266/333/400
Colden Arrow

DDR SDRAM module looks like.
10
Total Memory
X1 64MB∼1.0GB
X1 64MB∼1.0GB
X1 64MB∼1.0GB
3 64MB∼3.0GB
Figure 2-4