1. Manuals
  2. Brands
  3. JETWAY Manuals
  4. Motherboard
  5. P4X400DBR3A
  6. User manual

JETWAY P4X400DBR3A User Manual

M/b for socket 478 pentium 4 processor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
P4X400DB/P4X400DBP
P4X400DBZ
USER'S MANUAL
M/B For Socket 478 Pentium 4 Processor
NO. G03-P4X400DB
Rev: 2.0
Release date: Jan. 2004
Trademark:
* Specifications and Information contained in this documentation are furnished for information use only, and are
subject to change at any time without notice, and should not be construed as a commitment by manufacturer.

Advertisement

Table of Contents
loading

Related Manuals for JETWAY P4X400DBR3A

Summary of Contents for JETWAY P4X400DBR3A

  • Page 1 P4X400DB/P4X400DBP P4X400DBZ USER'S MANUAL M/B For Socket 478 Pentium 4 Processor NO. G03-P4X400DB Rev: 2.0 Release date: Jan. 2004 Trademark: * Specifications and Information contained in this documentation are furnished for information use only, and are subject to change at any time without notice, and should not be construed as a commitment by manufacturer.

  • Page 2: Table Of Contents

    TABLE OF CONTENT USER’S NOTICE ......................ii MANUAL REVISION INFORMATION ................ii COOLING SOLUTIONS ....................ii CHAPTER 1 INTRODUCTION OF P4X400DB/P4X400DBP/P4X400DBZ MOTHERBOARD FEATURE OF MOTHERBOARD ..................1 SPECIFICATION........................2 PERFORMANCE LIST ......................3 LAYOUT DIAGRAM & JUMPER SETTING ..............4 CHAPTER 2 HARDWARE INSTALLATION HARDWARE INSTALLATION STEPS ................

  • Page 3: User's Notice

    USER’S NOTICE COPYRIGHT OF THIS MANUAL BELONGS TO MANUFACTURER. NO PART OF THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF MANUFACTURER.

  • Page 4: Chapter 1 Introduction Of P4X400Db/P4X400Dbp/P4X400Dbz Motherboard

    Chapter 1 Introduction of P4X400DB/P4X400DBP/P4X400DBZ Motherboard 1-1 Feature of motherboard The P4X400DB/P4X400DBP/P4X400DBZ motherboard is design for use Intel Pentium 4 Processor in 478 Pin Package Processor with the VIA P4X400 Chipset delivers a high performance and professional desktop platform solution. Which utilize the Socket 478 design and the memory size expandable to 3.0GB.

  • Page 5: Performance List

    Spec Description ∗ ATX form factor 4 layers PCB size: 30.5x21.0cm Design ∗ VIA P4X400 North Bridge Chipset Chipset ∗ VIA VT8235CE South Bridge Chipset ∗ Support Intel Pentium 4 478 Pin package utilizes Flip-Chip Pin CPU Socket Grid Array (FC-PGA2) package processor (mPGA478B Socket) ∗...

  • Page 6: Layout Diagram & Jumper Setting

    The following performance data list is the testing result of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users (the different Hardware & Software configuration will result in different benchmark testing results.) Performance Test Report CPU:...
  • Page 7 (for P4X400DBP) P4X400DBZ PRINT GAME/MIDI PORT PS/2 Mouse PS/2 Keyboard COM1 COM2 LINE-IN LINE-OUT K/B Power ON Jumper (JP1) ATX 12V Power Conn. ATX Power Connector PS2 KB/Mouse Port CPU FAN USB Port/ LAN Connector CPU Socket PC99 Back Panel DDR SDRAM DIMM x3 VIA P4X400 Chip ATX P9 Power Conn.
  • Page 8 Jumper Name Description Page JBAT CMOS RAM Clear 3-pin Block Keyboard Power On Enable/Disabled 3-pin Block JP2, JP4 CPU Front Side Bus Frequency Select 6-pin Block Connectors Connector Name Description Page ATXPWR ATX Power Connector 20-pin Block P.11 ATX12V ATX 12V Power Connector 4-pin Block P.12 ATXP1...

  • Page 9: Chapter 2 Hardware Installation

    Hardware installation 2-1 Hardware installation Steps Before using your computer, you had better complete the following steps: 1. Check motherboard jumper setting 2. Install CPU and Fan 3. Install System Memory (DIMM) 4. Install Expansion cards 5. Connect IDE and Floppy cables, Front Panel /Back Panel cable 6.

  • Page 10: Glossary

    1-2 closed K/B Power ON Disable 2-3 closed K/B Power ON Enabled (Default) Keyboard Power On Setting (3) CPU Front Side Bus Frequency Select Jumper : JP2, JP4 (2x3-pin) CPU CLK AUTO (Default) 100MHz 133MHz 200MHz AUTO 100MHz 133MHz 200MHz (Default) CPU Front Side Bus Frequency Setting 2-3 Install CPU...

  • Page 11: About Intel Pentium 4 478-Pin Cpu

    Parallel Port - a low speed interface typically used for printers. PS/2 - a low speed interface used for mouse and keyboards. USB - Universal Serial Bus - a medium speed interface typically used for mouse, keyboards, scanners, and some digital cameras. Sound (interface) - the interface between the sound card or integrated sound connectors and speakers, MIC, game controllers, and MIDI sound devices.

  • Page 12: Install Memory

    Colden Arrow CPU ZIF mPGAB Socket When you put the CPU into the ZIF socket. No force require to insert of the CPU, then press the level to Locate position slightly without any extra force. 2-4 Install Memory This motherboard provides three 184-pin DDR DUAL INLINE MEMORY MODULES (DIMM) sites for DDR memory expansion available from minimum memory size of 64MB to...

  • Page 13: Expansion Card

    2-5 Expansion Cards WARNING! Turn off your power when adding or removing expansion cards or other system components. Failure to do so may cause severe damage to both your motherboard and expansion cards. 2-5-1 Procedure For Expansion Card Installation 1. Read the documentation for your expansion card and make any necessary hardware or software setting for your expansion card such as jumpers.

  • Page 14: Agp Slot

    Interrupt request are shared as shown the table below: INT A INT B INT C INT D INT E INT F INT G INT H √ Slot 1 √ Slot 2 √ Slot 3 √ Slot 4 √ Slot 5 √...
  • Page 15 Pin 1 ROW2 ROW1 3.3V 3.3V -12V 3.3V Soft Power On Power OK +5V (for Soft Logic) +12V (2) ATX 12V Power Connector (4-pin block) : ATX12V This is a new defined 4-pins connector that usually comes with ATX Power Supply. The ATX Power Supply which fully support Pentium 4 processor must including this connector for support extra 12V voltage to maintain system power consumption.
  • Page 16 PS/2 Mouse & PS/2 Keyboard Connector: PS2KBM The connectors for PS/2 keyboard and PS/2 Mouse. USB Port connector: USB The connectors are 4-pin connector that connect USB devices to the system board. LAN Port connector: LAN (only for P4X400DBP/P4X400DBZ) This connector is standard RJ45 connector for Network. Parallel Port Connector (25-pin female): LPT Parallel Port connector is a 25-pin D-Subminiature Receptacle connector.

  • Page 17: Headers

    This connector supports the provided IDE hard disk ribbon cable. After connecting the single plug end to motherboard, connect the two plugs at other end to your hard disk(s). If you install two hard disks, you must configure the second drive to Slave mode by setting its jumpers accordingly.
  • Page 18 IEEE 1394A Port Header (9-pin) : 1394A/1394B (For P4X400DBZ only) Note: Orient the read marking on the 1394 ribbon cable to pin 1 1394A 1394B Pin 1 Pin 1 IEE1394A Port Header Line-Out/MIC Header for Front Panel (9-pin): AUDIO This header connect to Front Panel Line-out, MIC connector with cable. Without install the cable, this header default setting is 5-6 short, 9-10 short.
  • Page 19 This connector connects to the hard disk activity indicator light on the case. Reset switch lead: RESET This 2-pin connector connects to the case-mounted reset switch for rebooting your computer without having to turn off your power switch. This is a preferred method of rebooting in order to prolong the lift of the system’s power supply.
  • Page 20 (10) FAN Headers (3-pin) : SFAN1, SYSFAN, CPUFAN These connectors support cooling fans of 350mA (4.2 Watts) or less, depending on the fan manufacturer, the wire and plug may be different. The red wire should be positive, while the black should be ground. Connect the fan’s plug to the board taking into consideration the polarity of connector.

  • Page 21: Starting Up Your Computer

    2-7 Starting Up Your Computer 1. After all connection are made, close your computer case cover. 2. Be sure all the switch are off, and check that the power supply input voltage is set to proper position, usually in-put voltage is 220V∼240V or 110V∼120V depending on your country’s voltage used.

  • Page 22: Chapter 3 Introducing Bios

    Chapter 3 Introducing BIOS The BIOS is a program located on a Flash Memory on the motherboard. This program is a bridge between motherboard and operating system. When you start the computer, the BIOS program gain control. The BIOS first operates an auto-diagnostic test called POST (power on self test) for all the necessary hardware, it detects the entire hardware device and configures the parameters of the hardware synchronization.

  • Page 23: The Main Menu

    3-3 The Main Menu Once you enter Award  BIOS CMOS Setup Utility, the Main Menu (Figure 3-1) will appear on the screen. The Main Menu allows you to select from fourteen setup functions and two exit choices. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.

  • Page 24: Standard Cmos Features

    Load Optimized Defaults Use this menu to load the BIOS default values these are setting for optimal performances system operations for performance use. Load Standard Defaults Use this menu to load the BIOS default values for the stable performance system operation that are factory settings for normal use.

  • Page 25: Advanced Bios Features

    The time format is <hour><minute><second>. Primary Master/Primary Slave Secondary Master/Secondary Slave Press PgUp/<+> or PgDn/<–> to select Manual, None, Auto type. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category.
  • Page 26 Allows you to choose the VIRUS Warning feature for IDE Hard Disk boot sector protection. If this function is enabled and someone attempt to write data into this area, BIOS will show a warning message on screen and alarm beep. Disabled (default) No warning message to appear when anything attempts to access the boot sector or hard disk partition table.

  • Page 27: Advanced Chipset Features

    Sets the number of times a second to repeat a keystroke when you hold the key down. The settings are: 6, 8, 10, 12, 15, 20, 24, and 30. Typematic Delay (Msec) Sets the delay time after the key is held down before is begins to repeat the keystroke. The settings are 250, 500, 750, and 1000.

  • Page 28: Dram Timing Settings

    Selecting Enabled allows caching of the system BIOS ROM at F0000h-FFFFFh, resulting in better system performance. However, if any program writes to this memory area, a system error may result. The settings are: Enabled and Disabled. Video RAM Cacheable Select Enabled allows caching of the video BIOS, resulting in better system performance. However, if any program writes to this memory area, a system error may result.

  • Page 29: Pci Timing Settings

    CMOS Setup Utility – Copyright(C) 1984-2003 Award Software AGP Timing Settings AGP Transfer Aperture Size Item Help AGP Transfer Mode AGP Driving Control Auto * AGP Driving Value Menu Level >> AGP Fast Write Disabled AGP Master 1 WS Write Enabled AGP Master 1 WS Read Enabled...

  • Page 30: Onchip Ide Function

    Please refer to section 3-7-1 OnChip Device Function Please refer to section 3-7-2 Onboard Super IO Function Please refer to section 3-7-3 Init Display First This item allows you to decide to activate whether PCI Slot or AGP VGA first. The settings are: PCI Slot, AGP Slot.

  • Page 31: Onchip Device Function

    Block mode is also called block transfer, multiple commands, or multiple sector read/write. If your IDE hard drive supports block mode (most new drives do), select Enabled for automatic detection of the optimal number of block read/writes per sector the drive can support. The settings are: Enabled, Disabled.

  • Page 32: Power Management Setup

    CMOS Setup Utility – Copyright(C) 1984-2003 Award Software Onboard Super IO Function Onboard FDD Controller Enabled Item Help Onboard Serial Port 1 3F8/IRQ4 Onboard Serial Port 2 2F8/IRQ3 UART2 Mode Normal Menu Level >> RxD, TxD Active Hi, Lo IR Duplex Mode Half Use IR Pins IRRX/IRTX...

  • Page 33: Pm Wake Up Events

    The Power Management Setup allows you to configure your system to most effectively save energy saving while operating in a manner consistent with your own style of computer use. CMOS Setup Utility – Copyright(C) 1984-2003 Award Software Power Management Setup ACPI Function Enabled Item Help...

  • Page 34: 3-8-1.1 Irqs Activities

    CMOS Setup Utility – Copyright(C) 1984-2003 Award Software Wake Up Events Item Help LPT & COM LPT/COM HDD & FDD PCI Master Menu Level >> Wake-Up on Ring/LAN Disabled Wake-Up on PCI PME Disabled Wake-Up on RTC Alarm Disabled x Date of Month Alarm x Time (hh:mm:ss) Alarm 0 : 0 : 0 >...

  • Page 35: Irq Resources

    This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed the CPU itself uses when communicating with its own special components. This section covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings.

  • Page 36: Irq Resources

    CMOS Setup Utility – Copyright(C) 1984-2003 Award Software IRQ Resources IRQ3 assigned to PCI Device Item Help IRQ4 assigned to PCI Device IRQ5 assigned to PCI Device IRQ7 assigned to PCI Device Menu Level >> IRQ9 assigned to PCI Device IRQ10 assigned to PCI Device...

  • Page 37: Load Standard/Optimized Defaults

    This section is for setting CPU Frequency/Voltage Control. CMOS Setup Utility – Copyright(C) 1984-2003 Award Software Miscellaneous Control CPU Clock Ratio Item Help Auto Detect DIMM/PCI Clk Enabled Spread Spectrum Disabled ** Current Host/PCI Clock is 100/33MHz ** Menu Level > Host/PCI Clock at Next Boot is 100/33MHz ** Current DRAM Clock is 133MHz **...

  • Page 38: Set Supervisor/User Password

    Load Standard Defaults When you press <Enter> on this item, you get confirmation dialog box with a message similar Load Standard Defaults (Y/N)? N Pressing <Y> loads the BIOS default values for the most stable, minimal-performance system operations. Load Optimized Defaults When you press <Enter>...

  • Page 39: Chapter 4 Driver & Free Program Installation

    DRIVER & FREE PROGRAM INSTALLATION Check your package and there is A MAGIC INSTALL CD included. This CD consists of all DRIVERS you need and some free application programs and utility programs. In addition, this CD also include an auto detect software which can tell you which hardware is installed, and which DRIVERS needed so that your system can function properly.
  • Page 40 IDE : VIA ATAPI VENDOR SUPPORT DRIVER IS USED TO FIXED COMPATIBILITY ISSUE FOR IDE DEVICES AGPVXD : VIA AGPVXD DRIVER IS TO BE INSTALLED, IF YOU ARE USING AN AGP VGA CARD, VIAGART.VXD WILL PROVIDE SERVICE ROUTINES TO YOUR VGA DRIVER AND INTERFACE DIRECTLY TO HARDWARE, PROVIDING FAST GRAPHIC ACCESS IRQ ROUTING : VIA PCI IRQ MINIPORT DRIVER IS TO BE INSTALLED UNDER WIN98...

  • Page 41: Sound Install Alc Audio Codec Driver

    5. Click NEXT to Install ATAPI Vender 6. Click NEXT to choose enabled DMA Mode Support Driver 7. Click NEXT to Install VIA AGP VXD Driver 8. Click NEXT to Install VIA IRQ Routing Mini port Driver 9. Click Finish to restart computer 4-2 SOUND Install ALC Audio Codec Driver 1.
  • Page 42 3. Click Finish and Restart Windows 4. Click Start→Program→Avance Sound Manager→AvRack. Then AVRACK Windows appears 5. Avance Audio Rack table can play CD, 6. Sound Effect select and KaraOK Mode WAV, MID, MP3, AVI, MPG Format File Function 7. Manual Sound Effect Setting 8.

  • Page 43: Lan Install Via10/100Mb Lan Controller Driver

    4-3 LAN Install VIA10/100MB LAN Controller Driver (Only for P4X400DBP/P4X400DBZ) The VIA10/100MB PCI Ethernet Adapter Driver path is X:\VIA\LANDRV Click LAN when Magic Install Menu appear 2. Setup VIA 10/100Mb PCI Ethernet Driver Driver install Finish , Click Yes and Restart When windows ask VIA 10/100Mb PCI Computer Ethernet Adapter driver path, Change...

  • Page 44: Magic Bios Install Bios Live Update Utility

    3. Click the Button to start installation 4. Select Program Group name or enter a new group name, click continue to setup and click OK after setup complete 4-4-1 How To Utilize PC-HEALTH 1. Click Program → Winbond Hardware Doctor 2.
  • Page 45 After finish Setup you will have a Magic Double click the Magic BIOS icon you will BIOS icon in your screen have this picture, choose from internet you can upgrade BIOS On-line When On-line update BIOS the program Click Next if you need update BIOS, after will auto-check your BIOS version upgrade BIOS, the system will clear CMOS and automatically restart...

  • Page 46: Usb2.0 Install Via Usb2.0 Device Driver

    4-6 USB2.0 Install VIA USB2.0 Device Driver 1. Click USB2.0 when MAGIC INSTALL 2. When USB2.0 Setup Program Appear, Click MENU Appear NEXT 3. Select Install USB Driver and Click NEXT Select FINISH and Restart your Computer 5. Check device working properly in Device Manager The Path of the file is X:\VIA\VIAUSB20\SETUP.EXE...

  • Page 47: Pc-Cillin Install Pc-Cillin2002 Anti-Virus Program

    4-7 PC-CILLIN Install PC-CILLIN 2002 Anti-virus program 1. Click PC-CILLIN when MAGIC INSTALL 2. (1) Click "Install PC-CILLIN" when PC- MENU appear CILLIN 2002 main menu appears, and Click NEXT when "Install Shield Wizard For PC- CILLIN 2002" (2) Click Open Manual. you can learn PC- CILLIN 2002 how to use 3.

  • Page 48: How To Disable On-Board Sound

    7. After PC-CILLIN 2002 complete, Please 8. finish register process, we recommend select register your information and get LICENSE update item to download newest engine code KEY from TREND MICRO web site, enter and virus code your license key and click FINISH Note : Please install ACROBAT READER, Before you read PC-CILLIN 2002 User Manual, the path at X:\acrobat\ar500eng.exe...

This manual is also suitable for:

P4x400dbP4x400dbpP4x400dbz

Table of Contents