Power Management Setup - JETWAY I407R1A User Manual

SPP/EPP/ECP/ECP+EPP
To operate the onboard parallel port as Standard Parallel Port only, choose "SPP." To
operate the onboard parallel port in the EPP modes simultaneously, choose "EPP." By
choosing "ECP", the onboard parallel port will operate in ECP mode only. Choosing
"ECP+EPP" will allow the onboard parallel port to support both the ECP and EPP modes
simultaneously. The ECP mode has to use the DMA channel, so choose the onboard
parallel port with the ECP feature. After selecting it, the following message will appear:
"ECP Mode Use DMA" at this time, the user can choose between DMA channels 3 to 1.
The onboard parallel port is EPP Spec. compliant, so after the user chooses the onboard
parallel port with the EPP function, the following message will be displayed on the screen:
"EPP Mode Select." At this time either EPP 1.7 spec. or EPP 1.9 spec. can be chosen.

3-8 Power Management Setup

The Power Management Setup allows you to configure your system to most effectively save
energy saving while operating in a manner consistent with your own style of computer use.
CMOS Setup Utility – Copyright(C) 1984-2001 Award Software
ACPI Function
Video Off Option
Video off Method
Video Off In Suspend
MODEM Use IRQ
HDD Power Down
Soft-off by PWR-BTTN
Wake-Up by PCI card
Power On by Ring
Resume by Alarm
X Date (of Month)
X Time (hh:mm:ss)
CPU Thermal Management Timer
DRAM Read Thermal Management
> PM Timer Reload Events
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
¡ ü ¡ ý ¡ ú ¡ û
F5:Previous Values
ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power Management
(ACPI). The settings are Enabled and Disabled.
Video Off in Suspend
This determines the manner in which the monitor is blanked. The choice are Yes → Video
will off , and No→ Video always On.
Power Management Setup
Enabled
Suspend -> off
V/H SYNC+Blank
Yes
3
Disabled
Instant-off
Disabled
Disabled
Disabled
0
0 : 0 :0
32 Min
Disabled
Press Enter
F6:Optimized Defaults
32
Item Help
Menu Level >
F1:General Help
F7:Standard Defaults