Table of Contents
Advertisement
(9)
Wake On-LAN/Modem Headers (3-pin) : WOL, WOM
This connector connects to a LAN/Modem card with a WAKE ON-LAN/Modem output.
This connector power up the system when a wake up signal is received through the
LAN/Modem card.
NOTE: This feature requires that Wake On LAN or Ring In Wake up is enabled.
(10) FAN Speed Headers (3-pin) : SYSFAN, SYSFAN2, CPUFAN
These connectors support cooling fans of 350mA (4.2 Watts) or less, depending on the
fan manufacturer, the wire and plug may be different. The red wire should be positive,
while the black should be ground. Connect the fan's plug to the board taking into
consideration the polarity of connector.
(11) IR infrared module Headers (5-pin) : IR
This connector supports the optional wireless transmitting and receiving infrared
module. You must configure the setting through the BIOS setup to use the IR function.
WOL
1
3
Wake-On-LAN Headers
1
CPUFAN
3
3
SYSFAN
1
1
3
SYSFAN2
18
WOM
1
3
Wake-On-Modem Headers
Advertisement
Table of Contents
