Agp Slot; Connectors, Headers; Connectors - JETWAY I407R1A User Manual

AC97/MC97
IMPORTANT! If using PCI cards on shared slots, make sure that the drivers support

2-5-4 AGP Slot

This motherboard provides an AGP Slot, only support the 1.5V 4X AGP VGA card.
Do not use AGP 2X card (3.3V) in this motherboard.
motherboard due to Intel® 845 chipset can not support AGP 2X (3.3V)
IMPORTANT!
Example 1: SiS 305 & ATi Rage 128 Pro AGP card those golden finger is compatible
with 2X/4X mode AGP slot, but only can support 2X (3.3V) only. If you
install these cards in Intel® 845 based motherboard it will burn and damage
the motherboard.
Example 2: We also find Diamond Vipper V770 golden finger is design for 2X/4X mode
AGP Slot. It can be adjusted the jumper for AGP 2X (3.3V) or AGP 4X
(1.5V). But the factory default setting is 2X (3.3V). If you install this AGP
card in motherboard without change the jumper setting to 4X (1.5V), it will
burn the motherboard.

2-6 Connectors, Headers

2-6-1 Connectors

√
"Shared IRQ" or that the cards don't need IRQ assignments. Conflicts will
arise between the two PCI groups that will make the system unstable or
cards inoperable.
Before you plug-in AGP card, please make sure the following notice is
fully understood and practiced. If your AGP card has "AGP 4X notch
(show below) please make sure your AGP card is AGP 4X (1.5V) not
AGP 2X (3.3V)
It will burn and damage the
2x notch
AG P SLO T
12
4x notch