Chapter 4 Driver & Free Program Installation; Magic Install Supports Windows 95/98/98Se/Nt4.0/2000 - JETWAY I402R2A User Manual

M/b for socket 478 pentium 4 processor
Table of Contents

Advertisement

ENTER PASSWORD:
Type the password, up to eight characters in length, and press <Enter>. The password
typed now will clear any previously entered password from CMOS memory. You will be
asked to confirm the password. Type the password again and press <Enter>. You may
also press <Esc> to abort the selection and not enter a password.
To disable a password, just press <Enter> when you are prompted to enter the password.
A message will confirm that the password will be disabled. Once the password is disabled,
the system will boot and you can enter Setup freely.
PASSWORD DISABLED.
When a password has been enabled, you will be prompted to enter it every time you try to
enter Setup. This prevents an unauthorized person from changing any part of your system
configuration.
Additionally, when a password is enabled, you can also require the BIOS to request a
password every time your system is rebooted. This would prevent unauthorized use of your
computer.
You determine when the password is required within the BIOS Features Setup Menu and its
Security option. If the Security option is set to "System", the password will be required
both at boot and at entry to Setup. If set to "Setup", prompting only occurs when trying to
enter Setup.
DRIVER & FREE PROGRAM INSTALLATION
Check your package and there is A MAGIC INSTALL CD included. This CD consists of
all DRIVERS you need and some free application programs and utility programs. In
addition, this CD also include an auto detect software which can tell you which hardware is
installed, and which DRIVERS needed so that your system can function properly. We call
this auto detect software MAGIC INSTALL.
MAGIC INSTALL Supports WINDOWS 95/98/98SE/ME/NT4.0/2000/XP
Insert CD into your CD-ROM drive and the MAGIC INSTALL Menu should appear as
below. If the menu does not appear, double-click MY COMPUTER/double-click CD-ROM
drive or click START/click RUN/type X:\SETUP.EXE (assuming X is your CD-ROM
drive).
message will appear at the center of the screen to assist you in
creating a password.
Chapter 4
40

Advertisement

Table of Contents
loading

This manual is also suitable for:

I402rI402

Table of Contents