Miscellaneous Control - JETWAY I402R2A User Manual

¡ ü ¡ ý ¡ ú ¡ û
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Show PC Health in Post
During Enabled, it displays information list below. The choice is either Enabled or Disabled.
Current CPU Temperature/Current System Temp/Current FAN1, FAN2 Speed/Vcore/
Vdd/3.3V/+5V/+12V/-12V/VBAT(V)/5VSB(V)
This will show the CPU/FAN/System voltage chart and FAN Speed.
Shutdown Temperature
This item can let users setting the Shutdown temperature, when CPU temperature over this
setting the system will auto shutdown to protect CPU.

3-11 Miscellaneous Control

This section is for setting CPU Frequency/Voltage Control.
CMOS Setup Utility – Copyright(C) 1984-2001 Award Software
CPU Clock Ratio
Auto Detect PCI Clk
Spread Spectrum
** Current Host/PCI Clock is 100/33MHz **
HOST/PCI Clock at Next Boot is
** Current DRAM Clock is 100 MHz **
DRAM Clock at Next Boot is
PCI Clock Ratio
CPU Vcore Select
Vcc1.5 Select
VDIMM Select
Flash Part Write Protect
¡ ü ¡ ý ¡ ú ¡ û Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Auto Detect PCI Clk
This item allows you to enable/disable auto detect PCI Clock.
The settings are: Enabled, Disabled.
F6:Optimized Defaults
Miscellaneous Control
X 8
Enabled
Disabled
100/33MHz
133MH
Host/3
Default
1.5V
2.5V
Enabled
F6:Optimized Defaults
38
F1:General Help
F7:Standard Defaults
Item Help
Menu Level >
→ Only for I402R
→ For I402R/I402
→ Only for I402R
F1:General Help
F7:Standard Defaults