JETWAY ALIOTH User Manual page 15

(2) ATX 12V Power Connector (4-pin block) : ATX12V
This is a new defined 4-pins connector that usually comes with ATX Power Supply. The
ATX Power Supply which fully support Pentium 4 processor must including this
connector for support extra 12V voltage to maintain system power consumption.
Without this connector might cause system unstable because the power supply can not
provide sufficient current for system.
(3) ATX P9 Power Connector (6-pin block) : ATXP9
This is a new defined 6-pins connector that usually comes with ATX Power Supply. The
ATX Power Supply which fully support Pentium 4 processor must including this
connector for support extra 3.3V and 5V voltage to maintain system power consumption.
Without this connector might cause system unstable because the power supply can not
provide sufficient current for system.
(4) PS/2 Mouse & PS/2 Keyboard Connector: KB (PS2 KB/MOUSE)
The connectors for PS/2 keyboard and PS/2 Mouse.
USB Port connector: UL _ B (USB)
(5)
The connectors are 4-pin connector that connect USB devices to the system board.
(6) LAN Port connector: LAN
This connector is standard RJ45 connector for Network connector.
Pin 1
PIN ROW2
1 3.3V
2 -12V
3 GND
4 Soft Power On
5 GND
6 GND
7 GND
8 -5V
9 +5V
10 +5V
Pin 1
GND
GND
GND
3.3V
3.3V
5V
Power Connector on Motherboard
12
ROW1
3.3V
3.3V
GND
5V
GND
5V
GND
Power OK
+5V (for Soft Logic)
+12V
BLK
BLK
BLK
ORG
ORG
RED
Power Plugs from Power Supply