Table of Contents
Advertisement
ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power Management
(ACPI). The settings are Enabled and Disabled.
Video Off Option
This determines the manner in which the monitor is blanked. The choice are Suspend
Modes
Off, and Always On.
Video Off Method
This determines the manner in which the monitor is blanked.
DPMS (default)
Blank Screen
V/H SYNC+Blank
Modem Use IRQ
This determines the IRQ in which the MODEM can use.
The settings are: 3, 4, 5, 7, 9, 10, 11, NA.
Power Button Function
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off state.
The settings are: Delay 4 Sec, Instant-Off.
Wake Up Events
Please refer to section 3-8-1
3-8-1 Wake up Events
VGA
LPT & COM
HDD & FDD
PCI Master
Wake-Up on Ring
Wake-Up on PCI PME
PS2 KB Wake up Selection
Wake-Up on Hot Key (PS2 KB)
Wake-Up on USB Device
Wake-Up on RTC Alarm
Date of Month Alarm
Time (hh:mm:ss) Alarm
> IRQs Activities
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Initial display power management signaling.
This option only writes blanks to the video buffer.
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video buffer.
Phoenix – AwardBIOS CMOS Setup Utility
Wake Up Events
OFF
LPT/COM
ON
OFF
Disabled
Disabled
Hot Key
Disabled
Disabled
Disabled
0
0 : 0 : 0
Press Enter
F6:Optimized Defaults
Menu Level >>
F7:Standard Defaults
31
off, All
Item Help
F1:General Help
Advertisement
Table of Contents
