Power User Overclock Settings - JETWAY 939GT4SLIR311 User Manual

3-12 Power User Overclock Settings

PCIE Clock
** Current Host Frequency is
CPU Clock at Next Boot is
*** Current DRAM Clock
DRAM Clock at Next Boot
CPU Ratio Select
CPU Vcore Select
CPU Vcore 7-Shift
Over Voltage
VDIMM Select
NB Voltage
LDT Voltage
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
CPU/DRAM Clock at next Boot is
This item allows you change the CPU Host /DRAM clock for overclock demand. When the CPU
Host clock is over the CPU default value BIOS will auto disabled Bi-Turbo function.
CPU Vcore 7-Shift
This item allows you select the CPU Vcore Voltage xx% more than the standard value, by this
function for the precise over-clocking for extra demanding of performance.
VDIMM Select
This item allows you to select 2.5V of the DDR Module. The choice are: 2.55V, 2.6V, 2.65V,
2.7V.
NB Voltage
This item allows you to select value of Voltage for North Bridge Chipset.
LDT Voltage
This item allows you to select value of Voltage for LDT.
PCIE Clock
** Current CPU Clock
CPU Clock at Next Boot is
*** Current DRAM Clock
DRAM Clock at Next Boot
CPU Ratio Select
CPU Vcore Select
CPU Vcore 7-Shift
Over Voltage
VDIMM Select
NB Voltage
LDT Voltage
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Phoenix – AwardBIOS CMOS Setup Utility
Power User Overclock Settings
F6:Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
Power User Overclock Settings
PCIE Clock
Min= 100
Max= 150
:Move ENTER:Accept ESC:Abort
F6:Optimized Defaults
100
200MHZ **
200
200MHZ ***
200MHz(Auto)
Default
Not support AMD Sempron Processor
Default
Normal(Default)
Enabled
2.50V(Default)
1.50V(Default)
1.25V(Default)
F7:Standard Defaults
100
200MHZ **
100
200MHZ ***
200MHz(Auto)
Default
Default
Normal
Enabled
2.50V(Default)
1.50V(Default)
1.25V(Default)
F7:Standard Defaults
36
Item Help
Menu Level >
F1:General Help
Item Help
Menu Level >
F1:General Help