The settings are: Disabled, Auto, Combined Mode, Enhanced Mode, SATA Only.
Default setting is Auto. Due to the Intel ICH5 Specification limited only provided two
controllers. When plug the Serial ATA hard drive in SATA1 or SATA2 only can support
either IDE1 or IDE2 can works in Windows 9X/ME/2000. But in the Windows XP the OS
can support 6 IDE devices both IDE1, IDE2 and SATA1/SATA2 can works.
3-8-2
Onboard Device Function
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
CMI8738 Sound Chip
Promise378 Operation Mode
CSA Gigabit Ethernet
CSA Gigabit LAN BootROM
USB Controller
USB 2.0 Controller
USB Keyboard Legacy Support
USB Mouse Legacy Support
Game Port Address
Midi Port Address
Midi Port IRQ
↑ ↓ →← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
CMI8738 Sound Chip
This will determine which on Board Sound Chip Function will use. The settings are:
Enabled, Disabled.
Promise378 Operation Mode
Select RAID Mode if you want to use the RAID function in Serial ATA drive. The settings
are: SATA Mode, RAID Mode
CSA Gigabit Ethernet
This will determine which CSA LAN controller will use. The settings are: Enabled,
Disabled.
USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB) controller and you
have a USB peripherals. The settings are: Enabled, Disabled.
USB Keyboard Legacy Support
Select Enabled if your system contains a Universal Serial Bus (USB) controller and you
have a USB keyboard. The settings are: Enabled, Disabled.
Game Port Address/Midi Port Address
This will determine which Address the Game Port/Midi Port will use.
3-8-3
Onboard Super IO Function
Onboard Device Function
Enabled
SATA
Enabled
Disabled
Enabled
Enabled
Disabled
Disabled
201
10
F6:Optimized Defaults
36
Item Help
Menu Level >>
F7:Standard Defaults