Table of Contents
Advertisement
(2) Keyboard Power On function Enabled/Disabled: JP1
USB Power on function Enabled/Disabled: JP2
When set as Enabled you can use keyboard to power on the system by password key-in,
and use USB device to wake up the system.
2-5
Installing the CPU
2-5-1 Overview
The motherboard comes with a surface mount 478-pin Zero Insertion Force (ZIF) socket
designed for the Intel® Pentium® 4 Processor in the 478-pin package with 512KB L2 cache.
The Pentium 4 processor features the Intel® NetBurst™ micro-architecture, Hyper-
Threading Technology, and 800/533/400MHz system bus. Together, these attributes improve
system performance by allowing higher core frequencies, faster execution of integer
instructions, and data transfer rates up to 6.4GB/s. The socket will also support the Intel
Prescott CPU when available.
Note! Intel® Hyper-Threading (HT)Technology
1. This motherboard supports Intel Pentium 4 CPUs with HT Technology.
2. HT Technology is supported under Windows XP, Linux 2.4.x (kernel) and later
versions only. Under Linux, use the HT complier to compile the code. If you are using
any other operating systems, disable the HT Technology item in BIOS to ensure system
stability and performance.
3. It is recommended that you install WinXP Service Pack 1.
4. Make sure to enable the Hyper-Threading Technology item in BIOS before installing a
supported operating system.
5. For more information on HT Technology, visit
www.intel.com/info/hyperthreading
1
3
JP1 1-2 closed K/B Power ON Disabled (Default)
JP1
1
3
JP1
JP1 2-3 closed K/B Power ON Enabled
JP2
JP2
JP2
1-2 closed USB Power On Disabled (Default)
1
1
JP2
2-3 closed USB Power On Enabled
3
3
10
Advertisement
Table of Contents
