3. Click the Button to start installation
4-4-1 How To Utilize PC-HEALTH
1. Click Program → Winbond Hardware
Doctor → Hardware Doctor the
Winbond Hardware Doctor will appears
You can remove the Utility in Control
Panel → Add/Remove Program icon
4. Select Program Group name or enter a
new group name, click continue to setup
and click OK after setup complete
2. After executing Winbond Hardware
Doctor it supports system voltage, Fan
speed and CPU/SYSTEM Temperature.
Because this is a On-time Monitoring
program therefore the value will change
after it detected, if the value is over
default setting the system will have
warning picture and beeps
49