Table of Contents
Advertisement
(7)
Floppy drive Connector (34-pin block): FDD
This connector supports the provided floppy drive ribbon cable. After connecting the
single plug end to motherboard, connect the two plugs at other end to the floppy
drives.
(8)
Primary IDE Connector (40-pin block): IDE1
This connector supports the provided IDE hard disk ribbon cable. After connecting
the single plug end to motherboard, connect the two plugs at other end to your hard
disk(s). If you install two hard disks, you must configure the second drive to Slave
mode by setting its jumpers accordingly. Please refer to the documentation of your
hard disk for the jumper settings.
PS/2
MOUSE
PS/2
Keyboard USB
COM1
Pin 1
Floppy Drive Connector
Primary IDE Connector
PRINT
GAME/MIDI PORT
COM2
Pin 1
16
MIC
LINE-IN
LINE-OUT
Advertisement
Table of Contents
