Headers - JETWAY 867ASR2A User Manual

This connector connects to the next set of Master and Slave hard disks. Follow
the same procedure described for the primary IDE connector. You may also
configure two hard disks to be both Masters using one ribbon cable on the
primary IDE connector and another ribbon cable on the secondary IDE connector.
•
Two hard disks can be connected to each connector. The first HDD is referred to
as the "Master" and the second HDD is referred to as the "Slave".
•
For performance issues, we strongly suggest you don't install a CD-ROM or
DVD-ROM drive on the same IDE channel as a hard disk. Otherwise, the system
performance on this channel may drop.

2-6-2 Headers

(1) Line-In/Out, MIC Header (9-pin): AUDIO
This header connect to Front Panel Line-In, Line-out, MIC connector with cable.
(2) USB Port Headers (9-pin) : USB1, USB2
Pin 1
Secondary IDE Connector
Pin 1
AUDIO
L-IN-L
G ND
MIC
L-O UT-L
Line-In/Out, MIC Headers
16
L-IN-R
G ND
MICP
G ND
L-O UT-R