Advanced Bios Features - JETWAY 867ASR2A User Manual

The time format is <hour><minute><second>.
Primary Master/Primary Slave
Secondary Master/Secondary Slave
Press PgUp/<+> or PgDn/<–> to select Manual, None, Auto type. Note that the specifications
of your drive must match with the drive table. The hard disk will not work properly if you
enter improper information for this category. If your hard disk drive type is not matched or
listed, you can use Manual to define your own drive type manually.
If you select Manual, related information is asked to be entered to the following items. Enter
the information directly from the keyboard. This information should be provided in the
documentation from your hard disk vendor or the system manufacturer.
If the controller of HDD interface is SCSI, the selection shall be "None".
If the controller of HDD interface is CD-ROM, the selection shall be "None"
Access Mode The settings are Auto Normal, Large, and LBA.
Cylinder number of cylinders
Head number of heads
Precomp write precomp
Landing Zone landing zone
Sector number of sectors

3-5 Advanced BIOS Features

CMOS Setup Utility – Copyright(C) 1984-2001 Award Software
Anti-Virus Protection
Recovery Genius
PhoneixNet Support
CPU L1 Cache
CPU L2 Cache
Quick Power On Self Test
ATA & SCSI Boot Order
First Boot Device
Second Boot Device
Third Boot Device
Boot other Device
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
Typematic Rate Setting
Typematic Rate (Chars/Sec)
Typematic Delay (Msec)
Security Option
OS Select For DRAM > 64MB
HDD S.M.A.R.T. Capability
Video BIOS Shadow
¡ ü ¡ ý ¡ ú ¡ û Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Anti-Virus Protection
Advanced BIOS Features
Disabled
Enabled
Disabled
Enabled
Enabled
Enabled
ATA, SCSI
Floppy
HDD-0
CDROM
Enabled
Disabled
Enabled
On
Normal
Disabled
6
250
Setup
Non-OS2
Disabled
Enabled
F6:Optimized Defaults
24
Item Help
Menu Level >
F1:General Help
F7:Standard Defaults