JETWAY 867ASR2A User Manual page 18

(7) Floppy drive Connector (34-pin block): FDD
This connector supports the provided floppy drive ribbon cable. After connecting the
single plug end to motherboard, connect the two plugs at other end to the floppy drives.
(8) Primary IDE Connector (40-pin block): IDE1
This connector supports the provided IDE hard disk ribbon cable. After connecting the
single plug end to motherboard, connect the two plugs at other end to your hard disk(s).
If you install two hard disks, you must configure the second drive to Slave mode by
setting its jumpers accordingly. Please refer to the documentation of your hard disk for
the jumper settings.
(9) Secondary IDE Connector (40-pin block): IDE2
PS/2
MOUSE
PRINT
PS/2
Keyboard USB
COM1 COM2
Primary IDE Connector
GAME/MIDI PORT
Pin 1
Floppy Drive Connector
Pin 1
15
MIC
LINE-IN
LINE-OUT