Table of Contents
Advertisement
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
Current Fan 1 Speed
Current Fan 2 Speed
CPU Vcore
3.3V
+12V
Internal VCC
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Current FAN1, FAN2 Speed/CPU Vcore/3.3V/+12V/Internal VCC
This will show the CPU/FAN/System voltage chart and FAN Speed.
3-11 Miscellaneous Control
This section is for setting CPU Miscellaneous Control.
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
VIA C3 Clock Ratio
Auto Detect PCI/DIMM Clock
Spread Spectrum
** Current Host/PCI Clock is
Host/PCI Clock at Next Boot is
** Current DRAM Clock is 133MHz **
DRAM Clock at Next Boot is
+2.5V Select
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
CPU Clock Ratio
This item allows you to select the CPU ratio.
Auto Detect PCI/DIMM Clock
This item allows you to enable/disable auto detect PCI/DIMM Clock.
The settings are: Enabled, Disabled.
Spread Spectrum
This item allows you to set the Spread Spectrum.
Host/PCI Clock at Next Boot is
This item allows you to select the CPU/PCI Clock, refer to
By press PageDown/PageUp key you can change the CPU Host/PCI Clock
When jumper setting CPU Host Clock 66MHz you can choose 66/33∼99/49MHz
When jumper setting CPU Host Clock 100MHz you can choose 100/33∼132/44MHz
When jumper setting CPU Host Clock 133MHz you can choose 133/33∼200/50MHz
3-12 Load Standard/Optimized Defaults
Load Standard Defaults
When you press <Enter> on this item, you get confirmation dialog box with a message similar
to:
PC Health Status
4964 RPM
0 RPM
1.450V
3.208V
12.256V
3.200V
F6:Optimized Defaults F7:Standard Defaults
Miscellaneous Control
Default
Enabled
Disabled
100
133MHz
2.65V
F6:Optimized Defaults F7:Standard Defaults
34
Item Help
Menu Level >
Item Help
Menu Level >
Page
8.
F1:General Help
F1:General Help
Advertisement
Table of Contents
