Table of Contents
Advertisement
DRIVERS you need and some free application programs and utility programs. In addition, this
CD also include an auto detect software which can tell you which hardware is installed, and
which DRIVERS needed so that your system can function properly. We call this auto detect
software MAGIC INSTALL.
MAGIC INSTALL supports WINDOWS 95/98/98SE/NT4.0/2000
Insert CD into your CD-ROM drive and the MAGIC INSTALL Menu should appear as below.
If the menu does not appear, double-click MY COMPUTER / double-click CD-ROM drive or
click START / click RUN / type X:\SETUP.EXE (assuming X is your CD-ROM drive).
From MAGIC INSTALL MENU you may make 10 selections:
1.
VIA 4 IN 1
2.
VGA
3.
SOUND
4.
LAN
USB2.0
5.
6.
DIRECTX9
7.
PC-CILLIN
8.
MAGIC BIOS
9.
BROWSE CD
10. EXIT
Each selection is illustrated as below:
4-1 VIA 4 IN 1
* The path of the file is X:\VIA\DRIVER\SETUP.EXE
IDE :
VIA ATAPI VENDOR SUPPORT DRIVER IS USED TO FIXED COMPATIBILITY
ISSUE FOR IDE DEVICES
AGPVXD :
VIA AGPVXD DRIVER IS TO BE INSTALLED, IF YOU ARE USING AN AGP VGA
CARD, VIAGART.VXD WILL PROVIDE SERVICE ROUTINES TO YOUR VGA
install VIA Service Pack 4 IN 1 driver
install VIA VGA driver
install ALC Audio Codec driver
install RT810X LAN Controller driver
install USB 2.0 driver
install Microsoft DirectX 9 driver
install PC-CILLIN2002 anti-virus program
install BIOS Live Update Utility
to browse the contents of the CD
to exit from MAGIC INSTALL menu
Install VIA Service Pack 4 IN 1 Driver
36
Advertisement
Table of Contents
