Attaching The Supplied Accessory To The Hand-Held Microphone (Utx-H2); Inserting The Plug-On Transmitter (Utx-P1) Into The Supplied Soft Case; Attaching The Optional Accessory; P1) - Sony UTX-H2/U3032 - UWP Series Handheld Microphone Operating Instructions Manual

Attaching the supplied
accessory to the hand-held
microphone (UTX-H2)
To attach the microphone
holder
Inserting the plug-on
transmitter (UTX-P1) into
the supplied soft case
Insert the UTX-P1 into the supplied soft
case with the rear side up, and close the
flap.
38 Attachment and Installation Procedures
Insert the bottom
part of the
microphone into
the holder.
Attaching the optional
accessory to the plug-on
transmitter (UTX-P1)
To attach a microphone or a
cable
Push the microphone or cable
connector (XLR-3-12C connector)
against the audio input connector of
the UTX-P1 until it clicks into place.
To detach a microphone or a cable
Press the release button and pull off
the microphone or cable slowly.
Microphone or
cable connector
Release button