Attaching Accessories To The Hand-Held Microphone (Utx-M40); Attaching Accessories To The Plug-On Transmitter (Utx-P40); Attaching Accessories To The Portable Diversity Tuner (Urx-P40/P41D) - Sony UWP-D21 Operating Instructions Manual

Attaching accessories to the
hand-held microphone (UTX-M40)
Attaching the microphone holder
Insert the base of the
microphone into the holder.
Replacing the microphone unit
Removing the microphone unit
Turn the microphone unit in the direction of the arrow.
Attaching the microphone unit
Turn the microphone unit in the opposite direction from
when you removed it, and make sure that the unit is
securely attached to the microphone.
Attaching accessories to the
plug-on transmitter (UTX-P40)
Attaching a microphone or cable
Push the microphone or cable connector (XLR-3-12C
connector) into the audio input connector of the
UTX-P40 until it clicks into place.
Microphone or
cable connector
Disconnecting a microphone or cable
Press the release button firmly until the lock is fully released,
and pull the microphone or cable out slowly.
Attaching accessories to the
portable diversity tuner (URX-P40/
P41D)
Connecting the conversion cable to the
OUTPUT connector
Example: XLR-BMP conversion output cable
for the URX-P40/URX-P41D (supplied)
Attaching a belt clip
See "Attaching a belt clip" (page 21).
Attaching the shoe mount adaptor
Attach the belt clip before attaching the shoe mount
adaptor (page 21).
Note
Attach belt clips upside-down if planning to attach the
shoe mount adaptor.
22
Microphone or cable
connector
Release button
Tighten the threaded sleeve
for a secure connection.