Features - Ryobi YN600A Operator's Manual

PROdUcT SPEcificATiONS
Motor .................................................................. 12 Volt DC
High Pressure Hose Length ....................................... 24 in.
Low Pressure Hose Length .......................................... 9 in.
kNOW YOUR iNfLATOR
See Figure 1, page 12.
The safe use of this product requires an understanding of
the information on the inflator and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating features and safety rules.
12V AdAPTOR
This connector is used to power the inflator using appropri-
ate 12V DC power sources.
NOTE: The inflator will not function unless connected to a
12V DC power source.
180º ROTATiNg WORkLigHT
Your inflator has a worklight that can be rotated 180° back
and forth.
AccESSORY cOMPARTMENT
The inflator features a storage space for inflator acces-
sories.
NOzzLES
Nozzles provided with the inflator can be used in a variety
of applications.
BUiLT-iN HOSE WRAP
The inflator has a built-in hose wrap that allows easy storage
of the high pressure hose.
cARRY HANdLE
The inflator has a carry handle for easy transport.
cORd RETAiNER
The cord wrap keeps the cord neatly out of the way for
storage.
NOTE: To reduce cord slack, press excess cord into grooves
in the cord retainer.

fEATURES

Gauge ...............................Analog (PSI, KG/CM
Maximum Pressure ..... 150 PSI, 10.34 BAR, 10.55 KG/CM
LOW PRESSURE dEfLATOR iNLET
Place the low pressure hose in the deflator inlet to quickly
deflate inflated objects.
HigH PRESSURE AiR HOSE
The high pressure hose can easily inflate high pressure items
like motorcycle, car, and bicycle tires.
HVLP fLEXi HOSE WiTH TWO HVLP
NOzzLES
The high volume/low pressure air hose can be used to inflate
or deflate low pressure items.
iNfLATOR ON/Off SWiTcH
Depress the inflator on/off switch on to the on position to
power the inflator on. To turn the inflator off, depress the
switch to the off position.
LOW PRESSURE iNfLATOR OUTLET
Place the low pressure hose in the inflator outlet to inflate
low pressure items like air mattresses, rafts and floats
PRESET PRESSURE
When the preset pressure feature is used, the inflator will
automatically stop inflating once a predetermined pressure
has been reached.
NOTE: The preset pressure feature can only be used when
inflating high pressure items.
PRESSURE gAUgE
The pressure gauge measures air pressure from 0 to
150 psi.
WORkLigHT ON/Off SWiTcH
Depress worklight on/off switch to turn light on and off.
7 — English
, and BAR)
2
2