Preferences Dialog - Terminal Tab; Preferences Dialog - File Transfer Tab - AMX NETLINX STUDIO V2.4 Instruction Manual

Preferences Dialog - Terminal Tab

Use the options on the Terminal Options tab of the Preferences dialog to set default Terminal
window preferences. The items in this dialog include:

Preferences Dialog - File Transfer Tab

Use the options on the File Transfer tab of the Preferences dialog to set default preferences for file
transfer operations. The options on this tab include:
NetLinx Studio (v2.4 or higher)
disk. Your TEMP or TMP environment variables are used to determined the drive used
for the two buffer files.
Available Disc Space on drive c - this read-only field indicates the current amount
of free disc space available on your local hard disc (c:). Use this number as reference
if you are increasing the buffer file size.
Add line feed character - This option controls whether line-feed characters are added to
incoming carriage returns if they do not already have them (default = disabled). This is so
that text copied from the terminal displays correctly in windows text editors. Many
editors do not recognize text that just has carriage returns at the end as lines and will
instead display a continuos string.
Send Ctrl characters to port - This option toggles the transmission of control characters
to the terminal's port (default = disabled).
Colors - These options allow to customize the colors for both states (Active (Connected)
and Inactive (Disconnected)) of the terminal window.
To change the colors on the terminal window, select Active (Connected), then click the
down arrows to access the Foreground (text) and Background color palettes. Select the
desired colors, and repeat for the Inactive (Disconnected) state.
Automatically select reboot when sending a TKN file (default = enabled).
When sending a TKN, automatically send the associate SRC (default = enabled).
Automatically choose "Smart Transfer" when sending a TP4 file (default = disabled).
By default, select "Send Bitmaps" when sending a TPD file (default = enabled).
By default, select "Send Icons" when sending a TPD file (default = enabled).
By default, select "Send Fonts" when sending a TPD file (default = enabled).
Assume I am connected directly to a touch-panel (no master) whenever transferring
TPD files (default = disabled).
Setting Program Preferences
183