Table of Contents
Advertisement
Programming
Shorthand Send_Commands (Cont.)
@SST
Changes the Star-
tup string sent to
the Central Con-
troller when the
touch panel pow-
ers up.
@SWK
Changes the
wake-up string
sent to the Con-
troller when the
touch panel is
activated.
Color Send_Commands
Use the color Send_Commands to set the colors for text, buttons, and pages. Use the same
command for setting gray scale values only change the color number value to reflect the gray scale
(72-86) value.
Color Send_Commands
CALL
Sets the colors for
a variable text but-
ton.
32
Syntax:
"'@SST-<string>'"
Variables:
string = alphanumeric characters
Example:
SEND_COMMAND TP,"'@SST-Touch Panel Power On'"
Sends touch panel Power On to the Central Controller when the touch panel powers up.
Syntax:
"'@SWK-<string>'"
Variables:
string = alphanumeric characters
Example:
SEND_COMMAND TP,"'@SWK-Touch Panel Activated'"
Sends Touch Panel Activated to the Central Controller.
You must use the variable text assignments to change button colors (see the Colors and
Programming Numbers table on page 27).
Syntax:
"'CALL<variable text address>-<data>'"
Variables:
You must have the variable text assignments to change button colors.
variable text address = 1 - 255
data = 6 color number series for:
FILL COLOR ON
FILL COLOR OFF
BORDER COLOR ON
BORDER COLOR OFF
TEXT COLOR ON
TEXT COLOR OFF
Example:
SEND_COMMAND TP,"'CALL1-1 3 0 0 72 74'"
Sets variable text button 1 to:
FILL COLOR ON = Red (one shade from brightest)
FILL COLOR OFF = Red (three shades from brightest)
BORDER COLOR ON = Red (brightest)
BORDER COLOR OFF = Red (brightest)
TEXT COLOR ON = White (brightest)
TEXT COLOR OFF = White (two shades from brightest)
AXP-PLV PosiTrack Pilot Video Camera Controller
Advertisement
Table of Contents
