AMX AXP-PLV POSITRACK PILOT VIDEO TOUCH PANEL Instruction Manual page 26

Programming
System Send_Commands (Cont.)
DBEEP
Gives a double
beep output.
ILEV
Inverts the joystick
axis.
PAGE
Flips to page with
specified page
name.
PKEYP
Displays aster-
isks (*) for keypad
entries.
PPOF
Closes a specific
popup page.
PPON
Opens a specific
popup page.
22
This command only works if the Double Beep value in the Protected Setup page is set to
ON.
Syntax:
"'DBEEP'"
Example:
SEND_COMMAND TP,"'DBEEP'"
Double beeps the panel.
Syntax:
"'ILEV <joystick axis to invert>'"
Variables:
joystick axis to invert =
0 = Normal G3 joystick (origin: top left)
1 = Invert horizontal axis (origin: top right)
2 = Invert vertical axis (origin: bottom left)
3 = Invert both axes (origin: bottom right)
Example:
SEND_COMMAND TP,"'ILEV 3'"
Inverts the joystick axis to move the origin to another corner.
Note: This command applies to joysticks drawn on touch panel pages. It does not apply to
the physical joystick in the PLV controller.
Syntax:
"'PAGE-<page name>'"
Variables:
page name = 1 - 50 ASCII characters
Example:
SEND_COMMAND TP, "'PAGE-MAIN PAGE'"
Flips the touch panel to the page named MAIN PAGE.
Syntax:
"'PKEYP-<number string>'"
Variables:
number string = 0 - 9999
Example:
SEND_COMMAND TP, "'PKEYP-1988'"
Displays the touch panel keypad with **** instead of 1988.
Syntax:
"'PPOF-<page name>'"
Variables:
page name = 1 - 50 ASCII characters
Example:
SEND_COMMAND TP,"'PPOF-Popup Page 1'"
Closes Popup Page 1.
Syntax:
"'PPON-<page name>'"
Variables:
page name = 1 - 50 ASCII characters
Example:
SEND_COMMAND TP,"'PPON-Popup Page 1'"
Opens Popup Page 1.
AXP-PLV PosiTrack Pilot Video Camera Controller