Motor Mode Lens Functions; Preset Functions - AMX AXB-PT101530 POSITRACK CAMERA CONTROLLER Instruction Manual

Programming

Motor mode lens functions

Motor Mode Lens Functions
Channel
1
3
4
5
7
8
10
12
13
14
16
17
18
20
21
22
24
25

Preset functions

Preset Functions
Channel
50
51
52
53
101-227
36
State Function
On Iris (+) at current speed
On Zoom (+) at current speed (increases output voltage)
On Focus (+) at current speed
On Iris (-) at current speed
On Zoom (-) at current speed (decreases output voltage)
On Focus (-) at current speed
On Iris (+) at maximum speed
On Zoom (+) at maximum speed (output minimum voltage)
On Focus (+) at maximum speed
On Iris (-) at maximum speed
On Zoom (-) at maximum speed (output maximum voltage)
On Focus (-) at maximum speed
On Iris (+) at 50% speed
On Zoom (+) at 50% speed (half speed)
On Focus (+) at 50% speed
On Iris (-) at 50% speed
On Zoom (-) at 50% speed
On Focus (-) at 50% speed
State Function
On Pan is seeking POT (Encoder) preset (status only)
On Tilt is seeking POT (Encoder) preset (status only)
On Zoom is seeking POT preset (status only)
On Focus is seeking POT preset (status only)
On Recall preset 1–127 or currently at preset 1–127.
The unit supports presets 1–255 but only presets 1–127
can be recalled using channel On commands. Presets
128–255 must be recalled with Send_Command
There are no feedback channels for presets
128-255.
CHAN PRESET=ON Send_Command MUST be issued
to enable this feature (see page 28).
"RP" .
AXB-PT10/15/30 PosiTrack Camera Controllers