AMX 10.4 TOUCH PANELS (G3 FIRMWARE) Instruction Manual page 60

Upgrading the Firmware
2. Select Tools > Master Communication Settings from the Main menu.
3. Press the NetLinx radio button from within the Platform section of the Communication
Settings dialog box (FIG. 18).
FIG. 18 Communication Setting tab
4. From the Communications Port drop-down list, choose Network. This indicates the
IP Address on the master is being reached from within a network connection.
5. Enter the IP Address information displayed on the Networking tab. Do not alter the defaulted
IP port.
6. Click the OK button to end the process of obtaining and assigning the IP Address to the
NetLinx Master.
7. Select Edit > Preferences, from the General - Communications section
8. Select the Enable Online Tree option to view the Connected devices from within the Project
Navigator window. The next step is to set the System value.
9. After the Communication Verification dialog window verifies active communication between
the PC, the Master and the panel, verify the touch panel appears in the Online tab of the Project
Navigator window (FIG. 19).
FIG. 19 Sample NetLinx Project Navigator window
10. Right-click on the touch panel and select Properties to confirm the on-board firmware.
Download the latest firmware file from AMX.COM > Tech Center > Downloadable
FIles > Firmware Files > AXT-CA10, AXT-CV10, AXT-CG10. Then Download the TSK
file to your computer.
56
Enter an IP Address
10.4" Touch Panels