AMX 10.4 TOUCH PANELS (G3 FIRMWARE) Instruction Manual page 35

System Send_Commands (Cont.)
PPOF
Closes a specific
popup page.
PPON
Opens a specific
popup page.
QBEEP
Stops all beeps.
RESET
Clears panel sta-
tus (same as
power up).
Saved data is not
cleared.
SETUP
Goes to the Setup
page.
SLEEP
Forces the touch
panel to screen
saver mode.
10.4" Touch Panels
Syntax:
"'PPOF-<page name>'"
Variable:
page name = 1 - 50 ASCII characters
Example:
SEND_COMMAND TP,"'PPOF-Popup Page 1'"
Closes Popup Page 1.
Syntax:
"'PPON-<page name>'"
Variable:
page name = 1 - 50 ASCII characters
Example:
SEND_COMMAND TP,"'PPON-Popup Page 1'"
Opens Popup Page 1.
Syntax:
"'QBEEP'"
Example:
SEND_COMMAND TP,"'QBEEP'"
Stops all beeps, including "'ABEEP'", "'ADBEEP'", and AXlink beeps.
Syntax:
"'RESET'"
Example:
SEND_COMMAND TP,"'RESET'"
Resets the touch panel.
Syntax:
"'SETUP'"
Example:
SEND_COMMAND TP,"'SETUP'"
Flips the touch panel to the Setup page.
Syntax:
"'SLEEP'"
Example:
SEND_COMMAND TP,"'SLEEP'"
Activates the screen saver mode on the touch panel.
Programming
31