Advertisement
Running the Setup Wizard
Table 2-4
Field
External Network ID
External Broadcast IP
External NIC IP
External NIC Subnet Mask
Default Gateway
Internal NIC IP
Internal NIC Subnet Mask
Range of Available Addresses The range of IP addresses available for internal network devices and
Click Next. The Restart Computer dialog box appears on top of the Setup Wizard. This dialog box gives
Step 7
you the option to restart BBSM now or cancel. (See
IP address settings to take place. If you do not restart, you cannot continue with the setup.
Restarting the BBSM Hotspot server at this point will save all of the settings entered for your server up
Caution
to this point. Click No to close the dialog box, which returns you to the Calculating TCP/IP Addresses
window. If you click Cancel at any point after the restart, the server settings and IP addresses that you
have entered at this time will be retained, while settings entered after the restart will be cancelled. If you
run the Setup Wizard a second time and do not change the IP address settings (a reboot is unnecessary),
if you click Cancel, all settings entered at that time, including the server settings, will be cancelled.
Figure 2-5
Step 8
For the IP address configuration settings to take effect, click Yes. The BBSM Hotspot server configures
the new settings, then restarts. After you log in to BBSM Hotspot as Administrator, the Welcome Back
window appears. (See
Cisco BBSM Hotspot 1.0 User Guide
2-8
BBSM Hotspot Setup Wizard, Calculating TCP/IP Addresses Field Descriptions
Description
The network ID used for your BBSM external network.
The IP address used to broadcast data within the external network.
The IP address of the external NIC on BBSM Hotspot. BBSM Hotspot
assigns the first host address that is not the default gateway, as
calculated from the External Network ID field in
The subnet mask calculated from the External Network ID subnet code
(after the slash) in
The default gateway address entered in the Default Gateway field in
Step
5.
The IP address on the internal NIC on BBSM Hotspot, as calculated
from the Internal Network ID in
calculated from the Internal Network ID.
The subnet mask on the internal NIC, as calculated from the Internal
Network ID subnet code (after the slash) in
end-user connections on the internal network. The range is from the
second host ID through the last host ID calculated.
Restart Computer Dialog Box
Figure
2-6.)
Chapter 2
Step
5.
Step
5. It is set to the first host address
Step
Figure
2-5.) You must restart or reboot for the
Setting Up BBSM Hotspot
Step
5.
5.
78-15293-01
Advertisement
