Cisco BBSM 1 User Manual page 11

Chapter 2 Setting Up BBSM Hotspot
–
–
Figure 2-8
Figure 2-9
Click Next. The Enter Network Device Configuration Parameters window appears. (See
Step 11
78-15293-01
After the question asking if you want to change your IP addresses, click No to ignore the
connectivity issues and continue with the setup. A warning message pops up to tell you that you
must resolve the IP address issue for BBSM Hotspot to work properly. (See
are then taken to the Enter Network Device Configuration Parameters window.
(See Figure 2-10.)
Click Cancel to stop the setup.
Test Failure Window
You Must Resolve This Issue Dialog Box
Running the Setup Wizard
Figure
Cisco BBSM Hotspot 1.0 User Guide
2-9.) You
Figure 2-10.)
2-11