Advertisement
Connecting a Client to BBSM Hotspot
Figure 2-21 FreeAccess Start Page
The following example shows how an end user using a wireless NIC connects to the Internet using
BBSM Hotspot. In the example, a coffee shop has purchased a BBSM Hotspot server, set it up, and
selected the FreeAccess web page. The end user does the following:
Step 1
Turn on your laptop and open your web browser. The FreeAccess web page should appear.
Step 2
If the Start page does not appear, contact property staff for information on configuring your wireless
NIC.
Step 3
After verifying the configuration of the wireless NIC, open the web browser. The FreeAccess Start page
appears.
Note
The end user is then redirected to a "Connecting..." window and then to the end user's configured initial
Step 4
page.
Cisco BBSM Hotspot 1.0 User Guide
2-22
If the Start page does not appear, refer to the troubleshooting section,
by End User" section on page
4-31, for probable causes and corrective action.
Chapter 2
Setting Up BBSM Hotspot
"No Start Page Received
78-15293-01
Advertisement
