Advertisement
Chapter 2
Setting Up BBSM Hotspot
Figure 2-24 Password Changed Confirmation Dialog Box
Click OK to close the dialog box. The Computer Management window reappears.
Step 8
Close the Computer Management window.
Step 9
Changing the MSDE 'sa' Password
The system administrator ('sa') login is a default system administrator login that is included with every
MSDE installation. Use the following procedure to change the default MSDE 'sa' password.
From the Dashboard, click Hotspot Configuration. The Server Settings web page appears.
Step 1
In the NavBar, click Security/SSL. The Security/SSL web page appears.
Step 2
Next to Change MSDE 'sa' Password, click Change. The MSDE 'sa' Password Form appears.
Step 3
(See
Note
Figure 2-25 MSDE 'sa' Password Form
Step 4
In the Enter current password field, enter the current 'sa' password.
Step 5
In the Enter new password field, enter the new password.
Step 6
In the Confirm new password field, reenter the new password again.
78-15293-01
Figure
2-25.)
You cannot change this password without knowing the current password. Save this password in
a secure location.
Changing the Default Security Passwords
Cisco BBSM Hotspot 1.0 User Guide
2-25
Advertisement
