Secure Socket Layer (Ssl) Module Leds; Table 2-5 Session Accelerator Module Led Descriptions - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Hardware Installation Manual

Cabling the CSS 11503 and CSS 11506 Modules

Secure Socket Layer (SSL) Module LEDs

Cisco 11500 Series Content Services Switch Hardware Installation Guide
2-20
Table 2-5 describes the LEDs.
Table 2-5 Session Accelerator Module LED Descriptions
LED Name Color
Status Green
(left)
Red
No color
Status Amber
(right)
The Secure Socket Layer (SSL) module, model CSS5-SSL-K9, operates as an
SSL server by adding security services between Web browsers (the client) and
HTTP servers. The SSL module is responsible for all user authentication,
public/private key generation, certificate management, and packet encryption and
decryption functions between the client and the server. Each SSL module
terminates SSL connections received from a client.
The front panel LEDs on the module indicate its operational status. The SSL
module has no connectors.
The CSS 11503 supports a maximum of two SSL modules and the CSS 11506
supports a maximum of four SSL modules.
Chapter 2
State Indicates
Solid The module is ready.
Solid The module failed the power-up self test
during the boot process.
Slow blink The module failed.
Off The module failed and has no power.
Fast blink The module is running power-up self test.
Slow blink The module is offline and active.
Solid The module is online and not active.
Off See the left status LED for indication.
Cabling and Troubleshooting the CSS
78-13884-06