Unpacking The Css; Unpacking The Css 11501; Unpacking The Css 11503 Or Css 11506 - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Hardware Installation Manual

Chapter 1 Unpacking and Installing the CSS

Unpacking the CSS

Unpacking the CSS 11501

Unpacking the CSS 11503 or CSS 11506

78-13884-06
The CSS is shipped in a protective shipping carton. The CSS 11501 is shipped as
a self-contained chassis; no components can be added or removed.The CSS 11503
and CSS 11506 contains the power supply, fan unit, Switch Module (SM), Switch
Control Module (SCM), and all ordered I/O modules (IOMs) preinstalled.
This section describes:
Unpacking the CSS 11501
•
Unpacking the CSS 11503 or CSS 11506
•
• If the Product is Damaged
To unpack the CSS 11501:
1. Remove the CSS 11501 accessories from the shipping carton. Save the
packing materials in case you need to repack the CSS later.
2. Check the configuration of the CSS 11501 and the accessories against the
items listed on the packing slip. Report any discrepancies as described in
the Product is Damaged"
To install the CSS 11501, go to the
3.
Due to the size and weight of a CSS 11503 or CSS 11506, move it to the
installation site before unpacking it from the shipping carton.
To unpack the CSS 11503 or CSS 11506:
Remove the CSS accessories from the shipping carton. Save the packing
1.
materials in case you need to repack the CSS later.
Check the configuration of the CSS and the accessories against the items
2.
listed on the packing slip. Report any discrepancies as described in
Product is Damaged"
Cisco 11500 Series Content Services Switch Hardware Installation Guide
section.
"Preinstallation Requirements"
section.
Unpacking the CSS
"If
section.
"If the
1-9