Rear-Panel Description - Cisco 675E Hardware Installation Manual

Rear-Panel Description

Rear-Panel Description
Figure 1-4 RPS 675 Rear Panel
10 0-2 40
V~
12 V
10 -6A
/12 A, -4
8
50 /60 Hz / 7.8 A M
AX OU
TP UT
DC OU
TP UT 1
DC OU
TP UT 2
1
1
AC input connector
2 DC output connectors
Warning
Cisco RPS 675 Redundant Power System Hardware Installation Guide
1-8
The RPS 675 rear panel has an AC power input connector and six DC output
connectors (numbered 1 to 6) to connect to supported devices. (See
C AU TI
O N : R
PS N O
T H O T
PL U G G
AB LE
DC OU
TP UT 3
DC OU
TP UT 4
DC OU
TP UT 5
DC OU
TP UT 6
2
3
Fan exhaust
Use the supplied AC power cord to connect to an AC power outlet.
The DC output connectors require a Cisco 16-pin-to-14-pin cable
(CAB-RPS-1614=) to connect to supported devices. (One cable is supplied with
the RPS; you can order additional cables separately.) The 16-pin connector plugs
into the RPS, and the 14-pin connector plugs into the device. Use only the Cisco
cable for this connection.
Attach only the Cisco RPS 675 (model PWR675-AC-RPS-N1=) to the RPS
receptacle. Statement 100C
3
Chapter 1 Product Overview
Figure 1-4).
78-15201-04