Creating, Deleting, And Resetting Raid Volumes - TYAN TOMCAT I875PF User Manual

Tomcat i875PF S5105

4.3 Creating, Deleting, and Resetting RAID Volumes

The Serial ATA RAID sets must be configured in the RAID Configuration utility. This
configuration can be done by the Intel® RAID Option ROM. During the Power-On Self Test
(POST), the following message will appear for a few seconds: Press <Ctrl-I> to enter RAID
Configuration Utility. After this message appears, press the <Ctrl> and <I> keys
simultaneously, the following screen menu appears.
The 'Drive Model', 'Serial #', and 'Size' listed in your system can differ
NOTE
from the following example.
Intel ® Integrated RAID for Serial ATA – RAID Configuration Utility
Copyright © 2003 Intel Corporation. All Rights Reserved. V3.5.0.2568
RAID Volumes:
None defined.
Non-RAID Disks:
Port Drive Model
0 Maxtor 6Y080MO
1 Maxtor 6Y080MO
[↑ ↓] – Select
[ MAIN MENU ]
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
4. Exit
[ DISK/VOLUME INFORMATION
Serial #
xxxxxxxx
xxxxxxxx
[ESC] Exit
49
http://www.tyan.com
Chapter 4: SATA/RAID Setup
]
Size Status
18.6GB Normal
18.6GB Normal
[ Enter] – Select Menu
Bootable
Yes
Yes