TYAN TOMCAT I875PF User Manual page 37

Tomcat i875PF S5105
SATA Mode
Set SATA to nomal IDE mode or RAID mode
IDE/RAID
On-Chip Serial ATA:
The integrated peripheral controller contains a SATA interface with support for two SATA
channels. Select "Auto" to activate each channel separately.
Disabled /Auto/ Combined Mode/ Enhanced Mode/ SATA Only
Serial ATA Port 0/1 Mode:
This item allows you to set SATA mode.
Primary Master / Primary Slave / Secondary Master / Secondary Slave
Onboard Device:
USB Controller
USB 2.0 Controller
USB Keyboard Support
USB Mouse Support
Onboard Lan Ctrl
Onboard Lan Boot Rom
CSA LAN (Giga-LAN)
Onboard Giga Lan Boot ROM
↑↓←→: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
USB Controller:
This item allows you to "Enable" or "Disable" onboard USB function.
Enabled / Disabled / 1&2 USB Port / 2&3 USB Port / 1&3 USB Port / 1 Port
/ 2 Port / 3 Port
USB 2.0 Controller:
This item allows you to decide to "Enable" or "Disable" the USB 2.0 device.
Enabled / Disabled
USB Keyboard Support:
Select "Enabled" if your system contains a USB controller and you have a USB keyboard.
Enabled / Disabled
USB Mouse Support:
Select "Enabled" if your system contains a USB controller and you have a USB mouse.
Enabled / Disabled
Onboard Lan Ctrl:
This item allows you to "Enable" or "Disable" onboard 82540 Lan Ctrl function.
Enabled / Disabled
Phoenix – AwardBIOS CMOS Setup Utility
Onboard Device
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Disabled]
[Enabled]
[Disabled]
http://www.tyan.com
_________________________
Menu Level ►►
34
Chapter 3: BIOS Setup
Item Help