Reset Disks To Non-Raid - TYAN TOMCAT I875PF User Manual

Tomcat i875PF S5105

4.6 Reset Disks to Non-RAID

Intel ® Integrated RAID for Serial ATA – RAID Configuration Utility
Copyright © 2003 Intel Corporation. All Rights Reserved. V3.5.0.2568
RAID Volumes:
ID Name
0 RAID_Volume1
Maxtor 6Y080MO
Maxtor 6Y080MO
Non-RAID Disks:
None defined.
[↑ ↓] - Select
1. Select option 3 Reset Disks to Non-RAID and press the <Enter> key to delete the
RAID volume and remove any RAID structures from the drives.
Resetting all RAID data will remove any internal RAID structures from all
RAID disks, including disks with working volumes. These structures are
used to maintain the RAID volumes. By removing these structures, the drive
will revert back to a Non-RAID disk that can then be used or reallocated to a
new RAID volume.
WARNING: Selecting "Yes" will cause all data on any RAID disk (RAID Volume or
Other RAID Disk) to be lost.
Are you sure you want to destroy all RAID data (Y/N):
NOTE
2. Confirm the volume deletion by pressing the <Y> key.
[ MAIN MENU ]
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
4. Exit
[ DISK/VOLUME INFORMATION
Level
RAID 0 (Strip)
xxxxxxxx
xxxxxxxx
[ESC] - Exit
Take caution in using this option; All data on the RAID drives and
any internal RAID structures will be lost!
[ RESET ALL DATA RAID DATA ]
Possible reasons to 'Reset Disks to Non-RAID' could include issues
such as incompatible RAID configurations or a failed volume or
failed disk.
http://www.tyan.com
Chapter 4: SATA/RAID Setup
Size
Strip
37.2
128KB
Port 0 18.6
Port 1 18.6
[ Enter] - Select Menu
52
]
Bootable
Status
Yes
Normal
Normal
Normal