Plugging In A Usb Storage Device; Unplugging A Usb Storage Device; Connecting And Disconnecting An Ipod; Connecting Your Ipod - Pioneer AVIC-Z140BH Operation Manual

Chapter
02 Basic operation

Plugging in a USB storage device

% Plug a USB storage device into the USB
and mini-jack connector.
USB and mini-jack connector

Unplugging a USB storage device

% Pull out the USB storage device after
checking that no data is being accessed.
Connecting and
disconnecting an iPod
CAUTION
! To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
! Pioneer cannot guarantee compatibility with
all USB mass storage devices and assumes
no responsibility for any loss of data on media
players, smart phones, or other devices while
using this product.

Connecting your iPod

Using the USB interface cable for iPod en-
ables you to connect your iPod to the naviga-
tion system.
p A USB interface cable for iPod (CD-IU51V)
(sold separately) is required for connection.
p For details about iPod compatibility with
this navigation system, refer to the informa-
tion on our website.
p Connection via a USB hub is not possible.
22
En
USB storage device
1 Check that no USB storage device is
connected.
2 Connect your iPod.
USB and mini-jack con-
nector

Disconnecting your iPod

% Pull out the USB interface cable for iPod
after checking that no data is being ac-
cessed.
USB interface cable for
iPod