Using Subwoofer Output; Using The High Pass Filter; Adjusting Source Levels - Pioneer AVIC-Z140BH Operation Manual

Customizing preferences

Using subwoofer output

The navigation system is equipped with a sub-
woofer output mechanism, which can be
turned on or off.
p This function is not available when "Sub
Woofer" is "Off".
Display the "AV Sound Settings"
1
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 181.
2 Touch [Sub Woofer].
3 Touch [On].
The subwoofer output is turned on.
# If you touch [Off], the subwoofer output is
turned off.
4 Touch [Reverse] or [Normal] to select
the phase of subwoofer output.
Touch [+] or [–] next to "Level" to adjust
5
the output level.
"+6" to "–24" is displayed as the level is in-
creased or decreased.
6 Touch [c] or [d] next to
"Frequency(Hz)" to select cut-off fre-
quency.
Each time you touch [c] or [d], cut-off fre-
quencies are selected in the following order:
50Hz — 63Hz — 80Hz — 100Hz — 125Hz
Only frequencies lower than those in the se-
lected range are output from the subwoofer.

Using the high pass filter

When you cut lower sounds from the subwoo-
fer output frequency, activate HPF (high pass
filter). Only frequencies higher than those in
the selected range are output from the front or
rear speakers.
Display the "AV Sound Settings"
1
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 181.
2 Touch [HPF].
Each time you touch [HPF] selects cut-off fre-
quencies in the following order:
Off — 50Hz — 63Hz — 80Hz — 100Hz —
125Hz

Adjusting source levels

SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
p Settings are based on the FM tuner volume
level, which remains unchanged.
p You cannot select [SLA] when the FM tuner
is selected as the AV source.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
Display the "AV Sound Settings"
2
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 181.
3 Touch [SLA].
4 Touch [+] or [–] to adjust the source vo-
lume.
"+8dB" to "–8dB" is displayed as the source
volume is increased or decreased.
The following AV sources are set to the same
source level adjustment volume automatically.
! CD, ROM, and DivX
! SD and USB
! Audio (Bluetooth audio), Pandora
(Bluetooth connection) and aha (Bluetooth
connection)
! Audio (Bluetooth audio), Pandora
(Bluetooth connection) and aha (Bluetooth
connection)
! AV1 and AV2
Chapter
31
187
En