Protecting Your Product From Theft; Removing The Detachable Faceplate; Attaching The Detachable Faceplate - Pioneer AVIC-Z140BH Operation Manual

Chapter
02 Basic operation
! Press the center of Multi-control to hear
the route guidance.
! Press and hold the center of Multi-con-
trol to mute the AV (Audio and Video)
source. To cancel the muting, press and
hold it again.
b Detachable faceplate
c
button
Press to remove the detachable faceplate
from the navigation system.
= For details, refer to Removing the detach-
able faceplate on this page.
Protecting your product
from theft
p This function is available for AVIC-X940BT
only.
The detachable faceplate can be detached
from the navigation system to discourage
theft, as described below.
CAUTION
! Do not expose the detachable faceplate to ex-
cessive shock or disassemble it.
! Never grip the buttons tightly or use force
when removing or attaching.
! Keep the detachable faceplate out of reach of
small children to prevent them from putting it
in their mouths.
! After removing the detachable faceplate, keep
it in a safe place so it is not scratched or da-
maged.
! Keep the detachable faceplate out of direct
sunlight and high temperatures.
! When removing or attaching the detachable
faceplate, do so after turning the ignition
switch off (ACC OFF).
16
En
Removing the detachable
faceplate
p The navigation system cannot be operated
while the detachable faceplate is removed
from the navigation system.
1 Press and hold the
it down.
When you release your finger, the bottom of
the detachable faceplate separates slightly
from the navigation system.
2 Gently grip the bottom of the detach-
able faceplate and slowly pull it outward.
Detachable faceplate

Attaching the detachable faceplate

1 Slide the detachable faceplate all the
way into the navigation system.
Make sure the detachable faceplate is se-
curely connected to the mounting hooks of
the navigation system.
button, and slide