Plugging In A Usb Storage Device; Unplugging A Usb Storage Device; Connecting And Disconnecting An Ipod; Connecting Your Ipod - Pioneer AVIC-F30BT Operation Manual

Chapter
Basic operation
02
! If data loss or corruption occurs on the sto-
rage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption.
p Compatibility with all USB storage devices
is not guaranteed.
This navigation system may not achieve op-
timum performance with some USB sto-
rage devices.
p Connection via a USB hub is not possible.

Plugging in a USB storage device

% Plug a USB storage device into the USB
and mini-jack connector.
USB and mini-jack connector

Unplugging a USB storage device

% Pull out the USB storage device after
checking that no data is being accessed.
Connecting and
disconnecting an iPod
CAUTION
! To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
! If data loss or corruption occurs on the sto-
rage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
20
Engb

Connecting your iPod

Using the USB interface cable for iPod en-
ables you to connect your iPod to the naviga-
tion system.
p A USB interface cable for iPod (CD-IU51V)
p For details about iPod compatibility with
p Connection via a USB hub is not possible.
1
connected.
2
USB storage device

Disconnecting your iPod

% Pull out the USB interface cable for iPod
after checking that no data is being ac-
cessed.
no liability for damages, costs or expenses
arising from data loss or corruption.
(sold separately) is required for connection.
this navigation system, refer to the informa-
tion on our website.
Check that no USB storage device is
Connect your iPod.
USB and mini-jack con-
nector
USB interface cable for
iPod