Searching By Selected City History; Setting Up A Route To Your Home; Searching For Points Of Interest (Poi) - Pioneer AVIC-Z140BH Operation Manual

Chapter
06 Searching for and selecting a location
7 Touch the desired city name.
The "House Number Selection" screen ap-
pears.
If the house number you have entered is not
found, a message appears. In that case, all
house number ranges are listed after touching
[Yes].
# If you touch
city appears on the map screen.
8 Touch the desired house number range.
The searched location appears on the map
screen.
= For the subsequent operations, refer to Set-
ting a route to your destination on page 45.

Searching by selected city history

You can search the cities from the history that
you have searched by entering the name with
the keyboard and selected by "Address", "POI"
or "Favorites".
p The history can store up to 50 cities.
p The cities are listed in order of the most re-
cent search.
Display the "Destination Menu" screen.
1
= For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Address].
The "Address Search" screen appears.
3 Touch [History].
The "City History List" screen appears.
4 Touch the desired city name.
The "Street Name" screen appears.
# If you touch
city appears on the map screen.
5 Enter the street name and then touch
[OK].
The "Street Selection" screen appears.
6 Touch the street you want.
The "Enter House Number" screen appears.
40
En
, the geographic center of the
, the geographic center of the
p If the selected street has only one matching
location, the searched location appears on
the map screen.
7 Enter the house number and then
touch [OK].
The "House Number Selection" screen ap-
pears.
# If you touch [OK] without entering the house
number, a representative location on the street in
the selected city appears.
8 Touch the desired house number range.
The searched location appears on the map
screen.
= For the subsequent operations, refer to Set-
ting a route to your destination on page
45.
Setting up a route to your
home
If your home location is stored, the route to
your home can be calculated by touching a
single key.
Display the "Destination Menu" screen.
1
= For details of the operations, refer to Screen
switching overview on page 26.
2 Touch [Return Home].
p If you have not registered your home loca-
tion, a message appears. Touch [Register]
to start registration.
= For details, refer to Registering your
home on page 162.
Searching for Points of
Interest (POI)
Information about various facilities (Points Of
Interest – POI), such as gas stations, parking
lots or restaurants, is available. You can
search for a POI by selecting the category (or
entering the POI Name).