Hdmi Input; Component (Component Video Input) - Onkyo HT-RC430 Instruction Manual

HDMI Input

1 2 3 4
Menu HDMI Input
If you connect a video component to an HDMI input, you
must assign that input to an input selector. For example, if
you connect your Blu-ray Disc/DVD player to HDMI IN 2,
you must assign "HDMI2" to the "BD/DVD" input
selector.
Here are the default assignments.
Input selector Default assignment
BD/DVD HDMI1
VCR/DVR HDMI2
CBL/SAT HDMI3
GAME HDMI4
AUX - - - - -
TV/CD - - - - -
■
BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX,
TV/CD
HDMI1, HDMI2, HDMI3, HDMI4:
Select the input to which the component has been
connected.
- - - - -:
Select if you're not using the HDMI OUT.
Each HDMI input cannot be assigned to two input
selectors or more. When HDMI1 - HDMI4 have already
been assigned, you must first set any unused input
selectors to "- - - - -" or you will be unable to assign
HDMI1 - HDMI4 to input selector.
Note
• If no video component is connected to HDMI output (even if the
HDMI input is assigned), the AV receiver selects the video
5 6
source based on the setting of "Component (Component Video
Input)".
• When an HDMI IN is assigned to an input selector as explained
here, the same HDMI IN will be set as a priority in the "Digital
Audio (Digital Audio Input)"
want to use the coaxial or optical audio input, make the
appropriate selection in the "Audio Selector" setting
(➔ page 41).
• Do not assign an HDMI IN to the TV/CD selector while "HDMI
Ctrl (RIHD)" is set to "On"
appropriate CEC (Consumer Electronics Control) operation will
not be guaranteed.
• If you assign "- - - - -" to an input selector that is currently
selected in "HDMI Through"
Through" setting will be automatically switched to "Off".
• The "TUNER" selector cannot be assigned and is fixed at the
"- - - - -" option.
(➔ page 38). In this case, if you
(➔ page 43), otherwise
(➔ page 43), the "HDMI
En-37
Advanced Operations

Component (Component Video Input)

1 2 3 4
Menu Component
If you connect a video component to a component video
input, you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player to
COMPONENT VIDEO IN 2, you must assign "IN2" to
the "BD/DVD" input selector.
Here are the default assignments.
Input selector Default assignment
BD/DVD IN1
VCR/DVR - - - - -
CBL/SAT IN2
GAME - - - - -
AUX - - - - -
TV/CD - - - - -
■
BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX,
TV/CD
IN1, IN2:
Select the input to which the component has been
connected.
- - - - -:
Select if you're not using the COMPONENT
VIDEO OUT.
Note
• The "TUNER" selector cannot be assigned and is fixed at the
"- - - - -" option.
5 6