Connection Tips And Video Signal Path - Onkyo HT-RC430 Instruction Manual

Owner manual
Hide thumbs Also See for HT-RC430:
Table of Contents

Advertisement

Connection Tips and
Video Signal Path
The AV receiver supports several connection formats for
compatibility with a wide range of AV equipment. The
format you choose will depend on the formats supported by
your components. Use the following sections as a guide.
The on-screen menus appear only on a TV that is
connected to the HDMI OUT. If your TV is connected
to other video outputs, use the AV receiver's display
when changing settings.
Note
• The on-screen setup menus are displayed when:
– There is no video input, or
– The video input is 480p, 576p, 720p, 1080i, or 1080p.
Video Connection Formats
Video components can be connected by using any one of
the following video connection formats: composite video,
component video, or HDMI, the latter offering the best
picture quality.
When choosing a connection format, bear in mind that the
AV receiver doesn't convert between formats, so only
outputs of the same format as the input will output the
signal.
Video Signal Flow Chart
Blu-ray Disc/DVD player, etc.
Composite
Component
IN
AV receiver
MONITOR OUT
Composite
Component
TV, projector, etc.
En-57
Audio Connection Formats
Audio components can be connected by using any of the
following audio connection formats: analog, optical,
coaxial, or HDMI.
When choosing a connection format, bear in mind that the
AV receiver does not convert digital input signals for
analog line outputs and vice versa. For example, audio
signals connected to an optical or coaxial digital input are
not output by the analog VCR/DVR OUT.
If signals are present at more than one input, the inputs will
be selected automatically in the following order of priority:
HDMI, digital, analog.
Audio Signal Flow Chart
HDMI
Blu-ray Disc/DVD player, etc.
Analog
HDMI
*1
AV receiver
Analog
*1
Depends on the "Audio TV Out" setting
*2
This is possible, when "Audio Return Ch" is set to "Auto"
(➔ page
44), the TV/CD input selector is selected, and your
TV is ARC capable.
Tip
• When a signal is input via HDMI and the corresponding input
selector is selected, the HDMI indicator lights.
Appendix
Optical
Coaxial
HDMI
IN
*1
*1
OUT
HDMI
*1 *2
TV, projector, etc.
(➔ page
43).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents