Day/Night Mode Selection [Day/Night]; Color Setting [Color] - JRC JMA-9922-6XA Instruction Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Day/Night Mode Selection [DAY/NIGHT]････････････････････
Whenever the [DAY/NIGHT] switch is pressed, the mode is changed over from DAY1 → DAY2
→ NIGHT1 →
display. The brilliance levels selected for each mode are saved. For brilliance adjustment, refer to
page 3 -12. For selection of DAY/NIGHT mode by menu operation, refer to "Color Setting" on the
next page.
Color Setting [COLOR]･･･････････････････････････････････
T he colors of the Day/Night mode [Day1, 2/NIGHT1, 2], system, background color outside the
bearing scale, background color inside the bearing scale, echoes, characters, dials, own ship's track,
and radar trails are set up.
Color Adjustment by Menu Operation
[DAY/NIGHT]
[SYSTEM]
[OUTER PPI]
[INNER PPI]
[CHARACTER]
[DIAL]
[ECHO]
[TRAILS]
[OWN TRACK]
Procedures
1
2
3
4
NIGHT2 and the current mode is indicated at the lower right of the radar
Register of DAY/NIGHT mode
System color adjustment
Adjustment of the background color outside the bearing scale
Adjustment of the background color inside the bearing scale
Adjustment of character colors
Adjustment of dial color
Adjustment of echo colors
Adjustment of the color of radar trails
Adjustment of the color of own ship's track
Click the MENU on the screen.
The Main Menu will appear.
Click SUB1 MENU .
The Sub1 Menu will appear.
Click SUB2 MENU .
The Sub2 Menu will appear.
Click COLOR .
The COLOR Menu will appear.
3-22
３