Move Own Ship's Display Position [Off Center] - JRC JMA-9922-6XA Instruction Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Move Own Ship's Display Position [OFF CENTER]･･････････
Own ship's position at the display center can be moved to an off-centered position within 66% of the
display radius. This function is convenient to observe a wide coverage in any direction.
When the range is 96 (or 120)NM, this function cannot be used.
３
Procedures
Press the left button of the
trackball .
Return Own Ship's Position to the Center
Procedures
OFF
CENTER
1 Click the
The bold cross cursor mark [+] will appear at the position of own ship on the
radar display.
2 Move the cross cursor mark [+] (own ship's position) to
another position with the trackball.
3 Press the left button of the trackball.
The own ship's position will move to the position of the cross cursor mark [+],
where it will be fixed.
OFF
1 Click the
CENTER
on the upper right of the screen.
on the upper right of the screen.
3-53